Buy iShoot Stereo MIC DC/DV Dedicated Microphone with 3.5mm Audio Plug Compatible with Canon Nikon Digital Camera & Video Camcorder with 3.5mm Mic Jack Online at Lowest Price Ever in Mexico

Condition	new
Asin	B08M9C6ZWR
Category	Electronics
Subcategory	Microphones
Leafcategory	Photography
MPN	FBA-PL-MIC02
Color	Black
Connector Type	3.5 mm Jack
Origin	USA
Brandname	iShoot
Height	1
Length	1
Width	1
Weight	1

1. The microphone can be used with digital cameras & video camcorders with 3.5mm MIC Jack, and can be used with the following cameras by hot shoe directly: Compatible with Canon EOS 1DX III / 1D Mark II, 7DII / 6D II / 5D Mark IV / 5D Mark III, 90D / 80D / 70D / 800D / 750D / 700D; R6 / R5 / R1 / R / RP; Compatible with Nikon D6 / D5 / D4S, D850 / D810 / D800 / D750 / D7200 / D5500 / D5300 / D3500 / D3300; Z7 II / Z7 / Z6 II / Z6 / Z5 / Z50.

2. The stereo microphone uses two stereo electret capacitor pickups, two separate signal amplification circuits, and acoustic interference tube technology, have good sensitivity and high directivity, pickup effect of long-distance and excellent directivity can easily be obtained.

3. The stereo MIC uses multi-level signal amplification circuit and noise reduction circuit, the output impedance of 500 ohms, suitable for most cameras and camcorders; providing low-cut and sensitivity enhancements to meet the requirements of different occasions; low-cut can effectively reduce wind noise.

4. Using one AA battery, with excellent standby time, while providing a low voltage LED alerts; Metal materials cavity, not only lightweight, rugged, but also conducive to high-frequency sound filtering of electromagnetic waves and enhancement of high frequency sounds;

5. Unique removable rubber buffers can effectively reduce the noise caused by vibration, providing ± 30 ° tilt adjustment; cold foot using a large lock nut with built-in 1/4 " copper nut; High-density sponge, weaved signal cable and gold-plated audio output plug, can effectively reduce sound transmission noise.

Battery

#272 in Professional Video Microphones

Note:
1. Low-cut design to reduce wind noise outdoors, but may reduce low frequency sound effects as well;
2. When sensitivity switch to +10 dB, it will enhance the sound effects, but may increase the noise as well;
3. When recording, please do not operate the switch or touch the microphone, do not move it vigorously, otherwise, the noise will be recorded;
4. When recording, keep the microphone switch vertical to the ground to ensure pickup heart-shaped for better sound effects;
5. When use and storage, please be careful to avoid wet, electrostatic, magnetic, hot or cold, which will affect the life of the product and the use effect.

Usage:
1. Remove the microphone from the shock absorber, rotate and open the rear, install one AA-1.5V fully charged battery according to the positive and negative prompts;
2. Install the microphone back to the shock absorber, attach to the camera hot shoe and adjust the microphone length according to the length of the lens;
3. Insert the plug properly into MIC hole of camera or DV;
4. Turn on the microphone first, and then the camera / DV power, set in video mode to start work;
5. When recording, keep the microphone switch vertical to the ground, do not adjust the switch during working;
6. After use, turn off the power, remove the battery, store the microphone in a dry place under room temperature.

Specifications:
Pickup type: Stereo electret capacitance x 2
Frequency response: 50Hz-16KHz
Sensitivity:-45dB
Enhance: +10 dB
Low-cut frequency: 60Hz 10dB (otc)
Output impedance: 500? (AT 1KHz)
SNR: 76dB
Maximum load SPL: 120dB
Battery type: AA battery
Cable length: 33cm
Plug: Gold-plated 3.5mm in diameter
Dimensions (excluding sponge): 200 x 42 x 65mm
Weight: about 120g

Package Includes:
1 x iShoot DC/DV Stereo Microphone PL-MIC02