product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | trueCABLE RJ45 Strain Relief Boots, Small 5.5 to 7.0mm Cut-to-Fit PVC Plug Cover, Transparent, 50 Pieces
Brand : TRUE CABLE
new | trueCABLE RJ45 Strain Relief Boots, Small 5.5 to 7.0mm Cut-to-Fit PVC Plug Cover, Transparent, 50 Pieces
Brand : TRUE CABLE
Product Specifications
Conditionnew
AsinB08ML8F78R
CategoryElectronics
SubcategoryCat 5e Cables
LeafcategoryCE
MPNSMCTF_50pc
ColorSmall
Connector TypeRJ45
OriginUSA
BrandnameTRUE CABLE
Height1
Length1
Width1
Weight1
Product Details
DUAL PURPOSE SNAGLESS DESIGN. Provides strain relief while protecting your ethernet cable and RJ45 connector.
VERSATILE & SECURE. Cut to fit, lock in place style boot compatible with 5.50 mm to 7.00 mm cable ODs.
EASY TO USE. Trim boot to fit, slide onto your cable, attach connector, slide boot into the rear of RJ45 plug, crimp, and done.
TRANSPARENT. Give your terminations a professional appearance, protect your hard work, and maintain bend radiuses required for standard compliance.
50 PIECE RESEALABLE BAG. These transparent RJ45 strain relief boots are sure to make your install hassle-free.
Product Description

Would you like professional looking terminations that don’t have the propensity to snag on everything in sight? These easy to use snagless boots are the perfect solution. In addition to providing snag-free performance, these cut to fit boots provide additional strain relief for your termination, helping to preserve all the hard work you put in. Fitment tested for use with trueCABLE Cat5e Shielded and Unshielded Ethernet cable. Will work with nearly any Ethernet cable or plug assuming proper fitment. Not compatible with external ground RJ45 shielded plugs. 

Installation Instructions:

  1. Using flush cutters, trim the end of the boot to fit the cable you are using. Note that some cables are thin enough to not require trimming of the boot to fit.
  2. Slide the boot down the cable.
  3. Attach the RJ45 connector per usual, but do not crimp it down yet.
  4. Slide the boot back up the cable and push the rigid sidebars into the rear of the RJ45 connector plug until boot and plug are mated flush.
  5. Crimp down your RJ45 plug and done. The boot should be permanently locked into place. 
  6. Tip: Bend the flexible anti-snag extension upward so the assembly will enter your crimp tool cavity.
Product Description

Would you like professional looking terminations that don’t have the propensity to snag on everything in sight? These easy to use snagless boots are the perfect solution. In addition to providing snag-free performance, these cut to fit boots provide additional strain relief for your termination, helping to preserve all the hard work you put in. Fitment tested for use with trueCABLE Cat5e Shielded and Unshielded Ethernet cable. Will work with nearly any Ethernet cable or plug assuming proper fitment. Not compatible with external ground RJ45 shielded plugs. 

Installation Instructions:

  1. Using flush cutters, trim the end of the boot to fit the cable you are using. Note that some cables are thin enough to not require trimming of the boot to fit.
  2. Slide the boot down the cable.
  3. Attach the RJ45 connector per usual, but do not crimp it down yet.
  4. Slide the boot back up the cable and push the rigid sidebars into the rear of the RJ45 connector plug until boot and plug are mated flush.
  5. Crimp down your RJ45 plug and done. The boot should be permanently locked into place. 
  6. Tip: Bend the flexible anti-snag extension upward so the assembly will enter your crimp tool cavity.